Sludge Dewatering Filter Press Fabric 2mm Thickness Herringbone Net

Filter Press Fabric Sludge dewatering network Van filter cloth

The filter cloth of filter press is mainly suitable for solid-liquid separation and sludge dewatering. It not only has good air permeability, water permeability and material impermeability, but also has a good design method, which makes the material easy to peel off after filter press and easy to clean. The filter belt has a long service life. It is a special design product for solid-liquid separation. Especially sludge dewatering.

Industrial wastewater treatment and dewatering treatment in food, chemical, mining and various industrial processes.

Technical specifications of filter belt of sludge dewaterer | press filter:

Permeability: Air volume per unit time passing through the filter cloth per unit area on both sides of the filter belt under the prescribed pressure difference

Permeability: The volume of water passing through the filter cloth per unit area per unit time under the specified water pressure difference on both sides of the filter belt

Permeability resistance: water viscosity and filtration resistance formed by the filter belt itself;

Maximum Bubbling Pore Diameter: Pore Boiling Pore Diameter when the gas passes through the maximum pore of the filter band to produce the first series of bubbles in water: Most of the pore of the filter band is opened by gas, and the number of bubbles is the largest, and the surface of water is boiling, then the measured pore size.

Bubble aperture ratio: the ratio of average boiling aperture to maximum bubbling aperture;

Porosity: The proportion of pore volume per unit volume of filter belt;

Thickness Wear Rate: The thickness wear of the filter belt when 1000CN is loaded and the grinding wheel type A-150 is milled 104 revolutions.

Press filter belt is mainly used for sludge dewatering, paper washing, coal washing, chemical industry, wine bran dewatering and other industries. Different specifications and sizes can be customized.